Cement Storage Silos
Heavy-Duty Storage Solutions
Overview
Heavy-duty cement storage silos designed for ready-mix concrete (RMC) plants, cement terminals, and construction sites. Our silos ensure zero contamination, smooth material flow, and long service life even in harsh environments.
Applications
Key Features
- Bolted or welded construction options
- Capacities from 20 tons to 200+ tons
- Integrated dust collector venting system
- Aeration pads for consistent material flow
- Epoxy-coated interior and exterior
- Level indicators (rotary or diaphragm type)
- Manhole access for inspection
Technical Specifications
| Capacity Range | 20 MT to 200+ MT |
| Material | Mild Steel (IS 2062) |
| Thickness | 4mm to 10mm depending on capacity |
| Coating | Epoxy primer + polyurethane finish |
| Discharge Height | Custom as per site requirement |
| Base Support | Concrete or structural steel |
Fly Ash Storage Silos
Anti-Bridging & Fluidizing Aeration System
Overview
Specialized silos for storing fly ash with anti-bridging design and fluidizing aeration system. Prevents compaction, ensures consistent discharge, and maintains material quality for use in concrete and cement products.
Applications
Key Features
- Fluidizing aeration membrane system
- Anti-segregation cone design
- Pressure relief valve included
- Available with load cells for inventory tracking
- Moisture-proof sealing
- Wear-resistant internal lining
- Pneumatic discharge option
Technical Specifications
| Capacity Range | 30 MT to 150 MT |
| Aeration System | Fluidizing pads with air blower |
| Material | Mild Steel with epoxy coating |
| Discharge System | Butterfly valve + pneumatic slide gate |
| Safety | Pressure relief valve + burst panel |
GGBS Storage Silos
Abrasion-Resistant Design for Fine & Abrasive Materials
Overview
Silos specifically designed for Ground Granulated Blast Furnace Slag (GGBS) with abrasion-resistant liners to handle the fine, abrasive nature of the material. Prevents wear and extends silo life.
Applications
Key Features
- Wear-resistant discharge gate
- Moisture-proof sealing system
- Custom capacity up to 150 tons
- Aeration system for flow assistance
- Level indicators and vent filters
- Easy maintenance access
Technical Specifications
| Capacity Range | 25 MT to 150 MT |
| Material | Mild Steel (IS 2062) / SS (304) |
| Discharge | Screw conveyor or slide gate |
| Special Feature | Anti-bridging cone design |
Micro Silica Storage Silos
10 MT to 30 MT – Abrasion-Resistant Design
Overview
Specialized silos designed for storing micro silica (silica fume) – a highly reactive pozzolanic material used in high-performance concrete, refractories, and cementitious applications. These silos are engineered with aeration systems and abrasion-resistant linings to handle the fine, cohesive, and abrasive nature of micro silica.
Applications
Key Features
- Capacities from 10 MT to 30 MT
- Fluidizing aeration system for cohesive powder flow
- Abrasion-resistant internal lining
- Moisture-proof sealing to prevent clumping
- Integrated dust collection / vent filter
- Pressure relief valve for safety
- Level indicators (rotary or diaphragm type)
- Pneumatic or mechanical discharge options
- Epoxy or polyurethane coating for corrosion protection
Technical Specifications
| Capacity Range | 10 MT to 30 MT |
| Material | Mild Steel (IS 2062) with epoxy coating |
| Aeration System | Fluidizing pads with air blower |
| Discharge System | Butterfly valve + pneumatic slide gate |
| Safety | Pressure relief valve + burst panel |
| Filtration | Pulse jet bag filter |
| Coating | Epoxy primer + synthetic, pu enamel |
Lime Storage Silos
Moisture-Controlled Venting System for Lime Quality Protection
Overview
Durable silos for quicklime and hydrated lime storage. Designed with specialized venting and moisture control to prevent clumping, chemical reaction, and degradation of lime quality.
Applications
Key Features
- Moisture-proof insulation
- High-efficiency dust filtration system
- Anti-clogging discharge mechanism
- Stainless steel liner options (SS304)
- Temperature monitoring provision
- Pressure relief valve for safety
- Quick discharge gate
Technical Specifications
| Capacity Range | 10 MT to 100 MT |
| Material | Mild Steel or SS304 |
| Filtration | Pulse jet bag filter |
| Safety | Pressure relief valve |
Chemical Storage Silos
Corrosion-Resistant Solutions for Chemicals & Additives
Overview
Silos for storing various chemicals including plastic granules, powders, and additives. Available in mild steel, stainless steel, or with special corrosion-resistant coatings.
Applications
Key Features
- Corrosion-resistant coating options
- Stainless steel SS304 / SS316 construction available
- Custom inlet/outlet configurations
- Temperature and humidity control options
- Sanitary finish for food-grade applications
- Explosion venting for hazardous materials
Technical Specifications
| Capacity Range | 2 MT to 100 MT |
| Material Options | MS, SS304, SS316, or coated MS |
| Coating | Epoxy, Synthetic , PU Enemal |
| Finish | Industrial or sanitary polished |
Belt Conveyors
Heavy-Duty Bulk Material Transport Solutions
Overview
Heavy-duty belt conveyors for transporting bulk materials like aggregates. Designed for continuous operation with minimal maintenance.
Applications
Key Features
- Custom length and width up to 1 Meter
- Impact idlers at loading points
- Skirt boards with rubber sealing
- Belt tracking system included
- Heavy-duty mild steel or channel frame
- Multiple drive options (geared motor or hydraulic)
- Emergency pull cord and zero-speed switch
Technical Specifications
| Belt Width | 650mm to 1 Meters |
| Length | Up to 22 meters (single section) |
| Capacity | Up to 30 - 50 TPH |
| Belt Type | EP/NN rubber belt (plain or chevron) |
| Speed | 1.0 to 2.5 m/s variable |
| Frame | C-channel or box section |
Screw Conveyors(WAMGROUP)
Efficient Transfer for Fine Powders & Granular Materials
Overview
Efficient screw conveyors for cement, fly ash, lime power, micro silicon, GGBS. Ideal for transferring cement, fly ash and lime from silos to mixing points or packing machines.
Applications
Key Features
- Closed Pipe line design
- Wear-resistant flighting (hardfaced)
- Sealed ends to prevent dust leakage
- Variable speed drive option
- Intermediate hanger bearings for longer lengths
- Dust-proof and weatherproof construction
- Easy access inspection covers
Technical Specifications
| Diameter | 168 dia to 323 dia |
| Length | 2 meters to 30 meters |
| Capacity | Up to 25 TPH (depending on material) |
| Flighting | Mild steel, hardfaced |
| Drive | Geared motor with direct |
Air Blowers
High-Performance Continuous Duty Blowers
Overview
High-performance air blowers for pneumatic conveying, silo aeration, and dust collection systems. Designed for 24/7 continuous operation with low maintenance requirements.
Applications
Key Features
- Roots blower technology (positive displacement)
- Oil-free air delivery option
- Noise-reduction acoustic enclosure available
- Capacities from 50 CFM
- Pressure up to 1 kg/cm²
- Heavy-duty cast iron body
- Easy maintenance with replaceable bearings
Technical Specifications
| Capacity (CFM) | 50 CFM |
| Pressure | 0.3 to 1.0 kg/cm² |
| Power | 50 HP |
| Type | Twin-lobe |
| Noise Level | 75 to 90 dB (enclosure optional) |
| Mounting | Skid-mounted with base frame |
Industrial Filters(WAMGROUP)
High-Efficiency Dust Collection & Silo Venting Solutions
Overview
Dust filters and bag filters for silo venting and dust collection. Ensures clean air discharge, complies with environmental regulations, and protects worker health.
Applications
Key Features
- Pulse-jet cleaning system (online cleaning)
- Polyester, PTFE, or Nomex filter bags
- Easy bag replacement design
- Explosion vent option for hazardous dust
- Weatherproof housing construction
- Low compressed air consumption
- Differential pressure gauge included
Technical Specifications
| Filter Area | 10 m² to 500 m² |
| Air-to-Cloth Ratio | 1.0 to 1.5 m/min |
| Bag Material | Polyester, PTFE, Nomex (as per temp) |
| Cleaning | Pulse-jet with timer or pressure control |
| Housing | Mild Steel / Stainless Steel (304) |
| Efficiency | 99.9% |
Butterfly Valves(WAMGROUP)
Heavy-Duty Material Flow Control Solutions
Overview
Heavy-duty butterfly valves for material flow control at silo outlets, conveyors, and transfer points. Available in manual and pneumatic actuation for remote operation.
Applications
Key Features
- Cast iron or stainless steel body
- Rubber-lined or metal seat
- Wafer or lug type design
- Pneumatic actuator option with solenoid valve
- Manual locking handle included
- Available from 100mm to 300mm size
- Abrasion-resistant options for harsh materials
Technical Specifications
| Size Range | 100mm dia to 300mm dia |
| Body Material | Aluminium |
| Disc Material | Aluminium |
| Actuation | Manual lever, gearbox, or pneumatic |
| Pressure Rating | Up to 1.5 kg/cm² |
Pressure Relief Valves(WAMGROUP)
Safety Protection Against Over-Pressurization & Vacuum
Overview
Safety valves that protect silos from over-pressurization or vacuum. Automatically opens to release excess pressure and closes when normal operating conditions return.
Applications
Key Features
- Calibrated to your silo pressure rating
- Weather-protected design for outdoor installation
- Low maintenance poppet mechanism
- Explosion venting option for hazardous dust
- Audible alarm on activation (optional)
- Non-jamming piston design
- Available in aluminum or stainless steel
Technical Specifications
| Set Pressure | 0.2 to 0.7 kg/cm² (adjustable) |
| Vacuum Setting | 0.05 to 0.2 kg/cm² (nominal range) |
| Valve Size | 4" to 12" |
| Body Material | Aluminum, Cast iron, or SS304 |
| Seal Material | EPDM or Silicone |
| Mounting | Flanged or threaded |
Vibrating Motors & Pads(WAMGROUP)
Industrial Flow Assistance & Silo Wall Activation
Overview
Industrial vibrators for hoppers, chutes, and screens to prevent material sticking and ensure smooth flow. Vibrating pads for silo wall activation to dislodge stuck material.
Applications
Key Features
- Weatherproof construction (IP55/IP65)
- Variable frequency option for adjustable force
- Low noise operation
- Easy bolt-on mounting
- Unbalanced weight design for centrifugal force
- Suitable for continuous or intermittent duty
- Low maintenance sealed bearings
Technical Specifications (Vibrating Motors)
| Centrifugal Force | 50 kg to 10,000 kg |
| Power | 0.1 HP to 15 HP |
| RPM | 750 to 3000 RPM (variable) |
| Protection | IP55 / IP65 |
| Mounting | Foot mounted |
Technical Specifications (Vibrating Pads)
| Type | Pneumatic or electric |
| Force | Up to 800 kg (pneumatic) |
| Mounting | Bolted or magnetic |
| Application | Silo wall, hopper, chute |